{"id":539,"date":"2023-09-13T11:49:10","date_gmt":"2023-09-13T18:49:10","guid":{"rendered":"https:\/\/kingchem.org\/?page_id=539"},"modified":"2023-09-20T13:43:16","modified_gmt":"2023-09-20T20:43:16","slug":"539-2","status":"publish","type":"page","link":"https:\/\/kingchem.org\/?page_id=539","title":{"rendered":"UV Ozone Cleaning Instructions"},"content":{"rendered":"

The UV Ozone cleaner (UVO) is located in the shared instrument lab (SIL) in the far left fume hood.<\/p>\n

    \n
  1. Open the UVO and place a microscope slide holding chips onto the metal surface, ensure that there is clearance to close the lid before closing with pressure, the lid should lock into place.<\/li>\n
  2. Power on the machine and press and hold the Mode<\/strong> button until the red light changes from minutes\/seconds to hours\/minutes. Adjust time to clean as needed using the Increase <\/strong>or Decrease <\/strong>buttons, a typical cleaning should only need 30 minutes, but additional time is available.<\/li>\n
  3. Ensure the oxygen tank is connect to the UVO, open the tank and adjust the flow so that a trickle of oxygen is released. Just enough so that if you press your finger to the nozzle you feel a slight pressure. Reconnect the tubing after adjusting flow (generally only the final valve needs to be adjusted, the main regulator valve is already at a very low pressure).<\/li>\n
  4. Press Start<\/strong> on the machine, the green light will illuminate while running. Allow to run for desired time.<\/li>\n
  5. If still running when you return, press the Stop<\/strong> button, open the lid, and remove chips. The slide will be somewhat hot, use caution so as not to drop the chips.<\/li>\n
  6. Power off the UVO. Remember to shut off the oxygen valve, it will be empty for next time if you do not.<\/strong><\/li>\n<\/ol>\n

    * Sometimes the power in the fume hood is finicky, you may need to try a different outlet.<\/p>\n","protected":false},"excerpt":{"rendered":"

    The UV Ozone cleaner (UVO) is located in the shared instrument lab (SIL) in the far left fume hood. Open the UVO and place a microscope slide holding chips onto the metal surface, ensure that there is clearance to close the lid before closing with pressure, the lid should lock into place. Power on the… » read more<\/a><\/p>\n","protected":false},"author":4,"featured_media":0,"parent":436,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"footnotes":""},"class_list":["post-539","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/kingchem.org\/index.php?rest_route=\/wp\/v2\/pages\/539","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/kingchem.org\/index.php?rest_route=\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/kingchem.org\/index.php?rest_route=\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/kingchem.org\/index.php?rest_route=\/wp\/v2\/users\/4"}],"replies":[{"embeddable":true,"href":"https:\/\/kingchem.org\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=539"}],"version-history":[{"count":3,"href":"https:\/\/kingchem.org\/index.php?rest_route=\/wp\/v2\/pages\/539\/revisions"}],"predecessor-version":[{"id":543,"href":"https:\/\/kingchem.org\/index.php?rest_route=\/wp\/v2\/pages\/539\/revisions\/543"}],"up":[{"embeddable":true,"href":"https:\/\/kingchem.org\/index.php?rest_route=\/wp\/v2\/pages\/436"}],"wp:attachment":[{"href":"https:\/\/kingchem.org\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=539"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}